Engines & CO

Engines & CO

Actieve filters

Referentie: 45705

Air filter - double layered, extra low

Beoordeling(en): 0
A double layered airfilter for flange size ø50mm. Extra low. On the inside the fine sized blue foam, on the outside the first white layer for catching the bigger dust particles. Filter comes dry, you must oil it yourself, preferably using a synthetic waterproof air filter oil, suitable for foam air filters. For example the Bell-Ray oil
Prijs € 32,75
Meer
Niet op voorraad

Referentie: 50706

Dust cover

Beoordeling(en): 0
Dust cover.Used over the air filter. The dust cover can be oiled as well in very dusty conditions.When less dusty it can be left dry.
Prijs € 19,95
Meer
Niet op voorraad

Referentie: 50705

Air filter - double layered

Beoordeling(en): 0
A double layered airfilter for flange size ø50mm. On the inside the fine sized blue foam, on the outside the first white layer for catching the bigger dust particles. Filter comes dry, you must oil it yourself, preferably using a synthetic waterproof air filter oil, suitable for foam air filters. For example the Bell-Ray oil
Prijs € 34,95
Meer
Niet op voorraad

Referentie: zenoah291

zenoah29

Beoordeling(en): 0
Zenoah Bore Up & Repair Kit 29 ccm
Prijs € 96,90
Meer
Laatste items in voorraad

Referentie: 45740

ELCON AIRBOX KIT

Beoordeling(en): 0
 Airbox with double layered filter. The bottom part comes with a Alloy ring and is screwed onto the carb using several o-rings. The air box is mounted together as shown in the explosion drawing. 2 mounting positions possible depending on a standing or laying engine Fits the TRAXX, Fourtex And IMP4CT.
Prijs € 69,95
Meer
Op voorraad

Referentie: zn0022

Zenoah Piston pin

Beoordeling(en): 0
 "Zenoah Piston pin" Länge: 27,9mm Durchmesser: 8mm Geeignet für: Zenoah G270RC Motor
Prijs € 4,95
Meer
Op voorraad

Referentie: mrskit26

MRS cilinder-kit 26cc

Beoordeling(en): 0
Tuned cilinder kit 26CC from MRS based upon the Zenoah. With cylinder- and piston porting. Features: very low fuel consumption, high torque in lower rev area and reaches high RPM. Fully CNC machined. Read before the directions of use for a long life time cycle and optimum performance.
Prijs € 199,00
Meer
Op voorraad

Volg ons op Facebook