Set of servo mounts for the throttle brake.
Allows a servo on top and servo mounting side ways.
Geen klantenbeoordelingen op het moment.
Referentie: 51415-11 H2
New steering lever, fits the new steering plate with miniature bearings. In the new lever are 3 mounting positions foreseen. Herewith you can achieve a better steering balance, it also allows more steering angle of the wheels. This has proven to be usefull especially on high grip tracks. The rear position is the same copies the original steering position...
Referentie: 51211 H1
Set of steering servo mounts.Designed for large scale steering servos like the Rhino Digi 4 and alike.
Referentie: 51402 H4
Lower wishbone right, for the Cleon MMX and the Cleon '08. New improved lower front wishbone with the option to mount a stabilization bar. The wishbone has been also improved on strength by using impact simulation.
Referentie: evo-023 C3
Stainless steel ball head with m4 right wire and a 4 mm hole for the serosaver to the servo
Referentie: 50320-41 A4
Shock rod-end for shock shafts that have the M5 thread rolled ending.
Referentie: 51508
The rear upper wishbones for the Elcon Cleon MMX from alloy 7075. The rear upper wishbone is now enlarged and has M8 L/R thread.Completely delivered with the L + R handed steel ball joints and assembly materials.Set consists of 4 ball joints and 2 upper wishbones
Referentie: 18500-22
Set of sintered bronze friction plates for the dif. Comes with rings, shims and pressure springs
Referentie: 70415-21 C3
Saver part from delrin for the servo saver
Referentie: 51137-02
Adjustable top part of the spoiler carrier. The angle of the spoiler can herewith be adjusted in 5 different positions to your personal liking
Referentie: 51415-02 B2
Distance bush with flange for the new type of steering plate with miniature bearings. Made from stainless steel.
Referentie: 18500
This differential is very strong and resistant to high forces that are imposed on the differential, especially in off-road racing.
Referentie: 70522 H1
Wheel shaft (HD) set for the rear of the Imp4ct, MMX and Cleon 08.The wheel shafts have the ball drive system and provided with M8 thread.Inclusive wheel nuts M8.
Referentie: 51403-01 H4
Currently this version is out of stock. Instead of this, we can deliver you a different version (50403) It fits to the MMX and 2008 as well. The shape is different, the dimensions (Wide and Length) are the same.
Referentie: 18608
Clutch bell with ventilation.Use only in combination with a teflon clutch.
Set of servo mounts for the throttle brake.
Allows a servo on top and servo mounting side ways.
