- Niet op voorraad

Axle mount for the rear of the Cleon MMX.
Assembly materials included.
Geen klantenbeoordelingen op het moment.
Referentie: 980070
Solid Elcon Models radio box. The lid has a groove in which the extra edge of the box fits, This secures a tight fit and makes the radio box watertight. Comes with a silicone wire to make the lid water tight and a rubber grommet for the servo cables. The needed hole for the grommet is to be drilled by the customer on his personal prefered position
Referentie: 51415-02 B2
Distance bush with flange for the new type of steering plate with miniature bearings. Made from stainless steel.
Referentie: 18660-z317T
Pinion gear Z3 for the layshaft. Surface of the gears can be silver or black. 15T
Referentie: 50415-13 C3
Ball joint 5mm, left handed thread.For steering system and rear upper wishbone
Referentie: 18320
Universal shock absorber.These shockers are high volume shockers and they DO NOT LEAK!Travel of this universal shocker is enlarged by 10% in the same length !100-144mm travel length.Cleon MMX front, Hörmann HT1/HT2 rear.
Referentie: 50404 H3
Bulkhead A for the Elcon Cleon.Delivered inclusive needed assembling materials.
Referentie: 51415-07 H2
Master axle of the steering system on the Cleon MMX from dureable 7075 alloy.Assembling materials and bearing included.
Referentie: 51550
Brake holder with brake disc, friction plates, distance bushings and assembly materials.
Referentie: 45620-02
6 pcs of clutch shoes for the 6-shoe teflon clutches
Referentie: 18660-z118T
Z1 gear (pinion), mounted on the clutch bell. 18 T
Referentie: 51511 H1
Rear upright left/right for the Cleon MMX. The rear upright is already prepared for the airbrakes.Assembling materials and bearings included.
Referentie: 50110
Body for the Cleon MMX and the Cleon '08.
Axle mount for the rear of the Cleon MMX.
Assembly materials included.