- Niet op voorraad

The rear upper wishbones for the Elcon Cleon MMX from alloy 7075.
The rear upper wishbone is now enlarged and has M8 L/R thread.
Completely delivered with the L + R handed steel ball joints and assembly materials.
Set consists of 4 ball joints and 2 upper wishbones
Geen klantenbeoordelingen op het moment.
Referentie: 50120
Side guards for the Elcon Cleon & MMX.Improved shape for a better fit of the exhaust and optimized mounting onto the chassis.Made from virtualy unbreakable plastic.Sold as a set.
Referentie: 50405 H3
Bulkhead B for the Elcon Cleon.Delivered inclusive needed assembling materials.
Referentie: 18520 H1
Set of output shafts for the differential.
Referentie: 51408 H3
Shock tower for the Cleon MMX.Assembly materials included.
Referentie: 51105 B1
Steel down stop plates for the chassis
Referentie: 45620-02
6 pcs of clutch shoes for the 6-shoe teflon clutches
Referentie: 18608
Clutch bell with ventilation.Use only in combination with a teflon clutch.
Referentie: evo-001 A4
Seal for shocker at the piston rod.Fits all Elcon shocks.
Referentie: 51402 H4
Lower wishbone right, for the Cleon MMX and the Cleon '08. New improved lower front wishbone with the option to mount a stabilization bar. The wishbone has been also improved on strength by using impact simulation.
Referentie: 51507 D3
Rear upper wishbone for the Cleon MMX and Imp4ctMade from the high grade alloy 7075. The turnbuckle has on its hex part a ring which marks the side of the left handed thread. Sold per piece.
Referentie: 51504
Axle mount for the rear of the Cleon MMX.Assembly materials included.
Referentie: 51415-02 B2
Distance bush with flange for the new type of steering plate with miniature bearings. Made from stainless steel.
Referentie: 18807
Conical disc for the steering system with steel ball joints
Referentie: 50110
Body for the Cleon MMX and the Cleon '08.
Referentie: 980070
Solid Elcon Models radio box. The lid has a groove in which the extra edge of the box fits, This secures a tight fit and makes the radio box watertight. Comes with a silicone wire to make the lid water tight and a rubber grommet for the servo cables. The needed hole for the grommet is to be drilled by the customer on his personal prefered position
The rear upper wishbones for the Elcon Cleon MMX from alloy 7075.
The rear upper wishbone is now enlarged and has M8 L/R thread.
Completely delivered with the L + R handed steel ball joints and assembly materials.
Set consists of 4 ball joints and 2 upper wishbones