
Referentie: 50900-11 H1
Upright for airbrake L
Upright for airbrake, left side. Assembling materials included.
Lower left front wishbone for the Cleon MMX and the Cleon '08.
New improved lower front wishbone with the option to mount a stabilization bar. The wishbone has been also improved on strength by using impact simulation.
Geen klantenbeoordelingen op het moment.
Referentie: 50900-11 H1
Upright for airbrake, left side. Assembling materials included.
Referentie: 51508
The rear upper wishbones for the Elcon Cleon MMX from alloy 7075. The rear upper wishbone is now enlarged and has M8 L/R thread.Completely delivered with the L + R handed steel ball joints and assembly materials.Set consists of 4 ball joints and 2 upper wishbones
Referentie: 18608
Clutch bell with ventilation.Use only in combination with a teflon clutch.
Referentie: 18500-22
Set of sintered bronze friction plates for the dif. Comes with rings, shims and pressure springs
Referentie: 18320
Universal shock absorber.These shockers are high volume shockers and they DO NOT LEAK!Travel of this universal shocker is enlarged by 10% in the same length !100-144mm travel length.Cleon MMX front, Hörmann HT1/HT2 rear.
Referentie: 18603
Carrier for the clutch bell.Used on drive train 12600, 13600 and in the Cleon. New version with carrier extension for the exhaust to the rear.
Referentie: 51605 H3
Layshaft carrier, with possibility to mount the layshaft brake 51550.
Referentie: 51137-03
Protective bar mounted between the spoiler carriers. Keeps for example your shock absorbers and other parts well protected against attacks from the rear.
Referentie: 50405 H3
Bulkhead B for the Elcon Cleon.Delivered inclusive needed assembling materials.
Referentie: 50320-41 A4
Shock rod-end for shock shafts that have the M5 thread rolled ending.
Referentie: 18821 H1
Rose joint with rod-end.Rod-end has internal M6 thread- right handed.The hole in the ball-joint is 5mm.
Referentie: 50415-13 C3
Ball joint 5mm, left handed thread.For steering system and rear upper wishbone
Referentie: 51415-02 B2
Distance bush with flange for the new type of steering plate with miniature bearings. Made from stainless steel.
Referentie: 51211 H1
Set of steering servo mounts.Designed for large scale steering servos like the Rhino Digi 4 and alike.
Referentie: 50750-04
For the connection of the manifold and exhaust
Referentie: 18701 A2
Bolt for mounting the shock absorber onto the aloy lower wishbones.
Lower left front wishbone for the Cleon MMX and the Cleon '08.
New improved lower front wishbone with the option to mount a stabilization bar. The wishbone has been also improved on strength by using impact simulation.