- Niet op voorraad

Brake holder with brake disc, friction plates, distance bushings and assembly materials.
Geen klantenbeoordelingen op het moment.
Referentie: 51210 H1
Set of servo mounts for the throttle brake.Allows a servo on top and servo mounting side ways.
Referentie: 51430 H1
Set of carbon twist plates for the Cleon MMX
Referentie: 51813 A2
These quick shock mounts are ultra strong from stainless steel with an M5 thread to go in the damper bridge
Referentie: 18807
Conical disc for the steering system with steel ball joints
Referentie: 51504
Axle mount for the rear of the Cleon MMX.Assembly materials included.
Referentie: 50445-06 B2
Bushing with conical collar for the servo saver. Inside Ø3mm Outside Ø4mm Fits ball joint (50320-20) which has a hole of Ø4mm
Referentie: 18660-Z119T
Z1 gear (pinion), mounted on the clutch bell. 19T
Referentie: 18410-09
Low nut (Metric fine), used for pressure adjustment of the servo saver spring
Referentie: 51602 H4
Central gear plate for the Cleon MMX.Assembly materials included.
Referentie: 70522 H1
Wheel shaft (HD) set for the rear of the Imp4ct, MMX and Cleon 08.The wheel shafts have the ball drive system and provided with M8 thread.Inclusive wheel nuts M8.
Referentie: evo-023 C3
Stainless steel ball head with m4 right wire and a 4 mm hole for the serosaver to the servo
Referentie: 70415-21
Saver part from delrin for the servo saver
Referentie: 18660-z316T
Pinion gear Z3 for the layshaft. Surface of the gears can be silver or black.16T
Referentie: 50320-42 A2
Alloy Shock rod-end with plastic bushing for shock shafts that have the M5 thread rolled ending
Referentie: 70300-04 A2
By-Pass shocker housing for the front shocker
Brake holder with brake disc, friction plates, distance bushings and assembly materials.