Referentie: 18410-09
Low Nut M8x1
Low nut (Metric fine), used for pressure adjustment of the servo saver spring
Op voorraad
- Er zijn geen items meer in uw wagen
- Verzending
- Totaal € 0,00
Oil for Differential
Waardering
High grade oil for the differential.
50 ml in a flacon.
We advice to fill the differential with approximately 10~12ml of oil.
So this is sufficient to re-fill your differential twice.
Productdetails
evo-0016
4 Items
Recensies
Geen klantenbeoordelingen op het moment.
16 andere producten in dezelfde categorie:
Referentie: 80701 F3
Motor mount small
Small motor mount made from high grade alloy 7075.
Op voorraad
Referentie: 70554 F4
Brake disk
Brake disc for the central brake of the Imp4ct.
2pc. needed for the complete brake.
Op voorraad
Referentie: 18924 C1
Ball joint alloy 5mm - M8 RIGHT
Spherical ball bearing glued in alloy anodized link.The high end spherical ball bearing has a 5mm inner diameter.The alloy link has the M8 right handed thread inside.These ball links give a significant weight reduction compared with the steel version and has a better quality bearing than the steel version.
Op voorraad
Referentie: 51105 B1
Down stop plates from steel (4pc.)
Steel down stop plates for the chassis
Op voorraad
Referentie: evo-023 C3
Stainless steel ball head m4
Stainless steel ball head with m4 right wire and a 4 mm hole for the serosaver to the servo
Op voorraad
Referentie: 80508
Upper wishbone mount, rear
Upper wishbone mount for the rear.
Incl assembly materials.
Op voorraad
Referentie: 70300-30grey
PROGRESSIVE SPRINGS 110MM GREY
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks)
Length: 110mm (with thread diameter 2.7mm)
Internal diameter: 32mm
Sold als pair.
Op voorraad
Referentie: 70529 B4
Guidance pin for spring Spline Drive (2pcs)
Guidance for the spring of the spline drive, inserted in the spline drive collar.
Delivered as a set.
Op voorraad
Referentie: 51137-02
Top part spoiler carrier (adjustable)
Adjustable top part of the spoiler carrier.
The angle of the spoiler can herewith be adjusted in 5 different positions to your personal liking
Op voorraad
Referentie: 45503 D4
Shock tower rear
Rear shock tower made from high grade alloy 7075.
Including needed assembly materials
Op voorraad
Referentie: 50320-20 C3
Ball joint 4mm
Ball joint 4mm used on shocker, stabi's, servosaver
Op voorraad
Referentie: 70300-30white
PROGRESSIVE SPRINGS 110MM WHITE
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks)
Length: 110mm (with thread diameter 2.4mm)
Internal diameter: 32mm
Sold als pair.
Op voorraad
Referentie: 50320-41 A4
Shock rod-end (for M5)
Shock rod-end for shock shafts that have the M5 thread rolled ending.
Op voorraad
Referentie: 80110
Chassis Fourtex (shorter wheelbase)
Chassis for the Fourtex for wheelbase according EFRA regulations.
Not including shorter drive shaft.
The chassis length is reduced at the front.
When using the front air brake it is needed to also replace the servo mounts and use small steering servos.
Op voorraad
Referentie: 70524 B4
Spring Spline Drive (2pcs)
Spring set for the spline drive.
Assures correct positioning of the drive shafts and dif shafts.
Op voorraad
High grade oil for the differential.
50 ml in a flacon.
We advice to fill the differential with approximately 10~12ml of oil.
So this is sufficient to re-fill your differential twice.