
Referentie: evo-0016
Oil for Differential
High grade oil for the differential.50 ml in a flacon. We advice to fill the differential with approximately 10~12ml of oil.So this is sufficient to re-fill your differential twice.
Side guard for the TRAXX.
Fits both Left and Right.
45120
Geen klantenbeoordelingen op het moment.
Referentie: evo-0016
High grade oil for the differential.50 ml in a flacon. We advice to fill the differential with approximately 10~12ml of oil.So this is sufficient to re-fill your differential twice.
Referentie: 70401
Lower wishbone for the IMP4CT and FourteX. Fits front and rear, left and right
Referentie: 51415-02 B2
Distance bush with flange for the new type of steering plate with miniature bearings. Made from stainless steel.
Referentie: 80111
Front cover, prevents against dirt and stones inside the front of your car.
Referentie: 18924 C1
Spherical ball bearing glued in alloy anodized link.The high end spherical ball bearing has a 5mm inner diameter.The alloy link has the M8 right handed thread inside.These ball links give a significant weight reduction compared with the steel version and has a better quality bearing than the steel version.
Referentie: 70528 B4
Ring for the spline drive to secure the pin. Made from alloy, anodized and laser engraved with Elcon logo.
Referentie: 70509 D3
Pin set (stainless steel) for mounting the upright / c-hub on the front- and the rear wishbone. The pin is mounted with 2 nyloc nuts and rings.
Referentie: 80608 F4
Ring gear with inner teeth (60T) for the planetary gears
Referentie: 50415-13 C3
Ball joint 5mm, left handed thread.For steering system and rear upper wishbone
Referentie: 70300-30white
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.4mm) Internal diameter: 32mm Sold als pair.
Referentie: 80508
Upper wishbone mount for the rear. Incl assembly materials.
Referentie: 70300-30bleu
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.3mm) Internal diameter: 32mm Sold als pair.
Referentie: 51813 A2
These quick shock mounts are ultra strong from stainless steel with an M5 thread to go in the damper bridge
Referentie: 45415-21 C3
Servo saver part with 1 arm
Side guard for the TRAXX.
Fits both Left and Right.