Disc for the pivot of the C-hub, which is mounted on top and under the C-hub for a smooth steering of the front upright
70413-02
Geen klantenbeoordelingen op het moment.
Referentie: 80110
Chassis for the Fourtex for wheelbase according EFRA regulations. Not including shorter drive shaft. The chassis length is reduced at the front. When using the front air brake it is needed to also replace the servo mounts and use small steering servos.
Referentie: evo-001 A4
Seal for shocker at the piston rod.Fits all Elcon shocks.
Referentie: 80603 F1A
Housing for the starter, made from high grade 7075 alloy.
Referentie: 50445-06 B2
Bushing with conical collar for the servo saver. Inside Ø3mm Outside Ø4mm Fits ball joint (50320-20) which has a hole of Ø4mm
Referentie: 80205
Set of assembly materials for fixation of the fuel tank.
Referentie: 80419 F2
Bearing mount for steering axles, mounted on chassis. Bearing 18700 (16x8x5mm) fits this mount .
Referentie: 50320-42 A2
Alloy Shock rod-end with plastic bushing for shock shafts that have the M5 thread rolled ending
Referentie: 45140 D4
Engine brace made from 7075 alloy. Prevents cracking of the fan cover and carter. Bolts straight onto Zenoah engines 23cc/26cc/29cc.
Referentie: 80605 F1A
Housing for the clutch bell. Machined from high grade 7075 alloy.
Referentie: 80508
Upper wishbone mount for the rear. Incl assembly materials.
Referentie: 70300-30grey
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.7mm) Internal diameter: 32mm Sold als pair.
Referentie: 70509 D3
Pin set (stainless steel) for mounting the upright / c-hub on the front- and the rear wishbone. The pin is mounted with 2 nyloc nuts and rings.
Referentie: 50750-04
For the connection of the manifold and exhaust
Referentie: 18620-05
Pressure disc made from brass, fits the spring of the clutch. Used at clutch 50620 and 18620. Sold per pc.
Referentie: 70201_set
Battery strip from epoxy for the IMP4CT, TraxX and FourteX. Including needed mounting parts to bolt is straigth on your car.
Referentie: 70521 B4
Drive shaft for the Spline-Drive. Delivered as set.
Disc for the pivot of the C-hub, which is mounted on top and under the C-hub for a smooth steering of the front upright
