- Niet op voorraad
Referentie: 18620-05
BRASS PRESSURE DISC CLUTCH
Pressure disc made from brass, fits the spring of the clutch. Used at clutch 50620 and 18620. Sold per pc.
Op voorraad
- Er zijn geen items meer in uw wagen
- Verzending
- Totaal € 0,00
Bearing mount
Waardering
Bearing mount for steering axles, mounted on chassis.
Bearing 18700 (16x8x5mm) fits this mount .
Productdetails
80419 F2
Recensies
Geen klantenbeoordelingen op het moment.
16 andere producten in dezelfde categorie:
Referentie: 70625 F4
Drive cup rear pinion gear
Drive cup for the rear pinion gear carrier, with star shape for double brake discs.
Op voorraad
Referentie: 70300-30grey
PROGRESSIVE SPRINGS 110MM GREY
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.7mm) Internal diameter: 32mm Sold als pair.
Op voorraad
Referentie: 50415-13 C3
Ball joint L
Ball joint 5mm, left handed thread.For steering system and rear upper wishbone
Op voorraad
Referentie: 18410-09
Low Nut M8x1
Low nut (Metric fine), used for pressure adjustment of the servo saver spring
Op voorraad
Referentie: 80110
Chassis Fourtex (shorter wheelbase)
Chassis for the Fourtex for wheelbase according EFRA regulations. Not including shorter drive shaft. The chassis length is reduced at the front. When using the front air brake it is needed to also replace the servo mounts and use small steering servos.
Op voorraad
Referentie: 50750-04
Teflon tube exhaust
For the connection of the manifold and exhaust
Op voorraad
Referentie: 80400-21
PINION CROWNWHEEL
Pinion for the crownwheel, fits both front and rear.
Op voorraad
Referentie: 80423
Output drive planet gear rear
Output drive for the planet gear, used at the rear.
Op voorraad
Referentie: 80506 F3
Support rear, right
Support for the rear end of the FourteX, right side.
Op voorraad
Referentie: 50900-04 C4
Spring air brake (10 pcs)
Spring for the air brake.10 pcs in one bag
Op voorraad
Op voorraad
Referentie: 80416 F2
Steering lever R
Steering lever for mounting the steering plate and steering rods.
Op voorraad
Referentie: 51137-02
Top part spoiler carrier (adjustable)
Adjustable top part of the spoiler carrier. The angle of the spoiler can herewith be adjusted in 5 different positions to your personal liking
Op voorraad
Referentie: evo-001 A4
SEAL FOR SHOCKER - ALL SHOCKS
Seal for shocker at the piston rod.Fits all Elcon shocks.
Op voorraad
Op voorraad
Bearing mount for steering axles, mounted on chassis.
Bearing 18700 (16x8x5mm) fits this mount .