- Niet op voorraad

Guidance for the spring of the spline drive, inserted in the spline drive collar.
Delivered as a set.
Geen klantenbeoordelingen op het moment.
Referentie: 70413-01 C1
Distance bush or pivot, which is mounted in the plastic bushings for a smooth steering of the front upright
Referentie: 70300-30bleu
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.3mm) Internal diameter: 32mm Sold als pair.
Referentie: 50445-06 B2
Bushing with conical collar for the servo saver. Inside Ø3mm Outside Ø4mm Fits ball joint (50320-20) which has a hole of Ø4mm
Referentie: 80612 F2
Support planet gear, front side. Made from high grade alloy 7075.
Referentie: 50320-40-r
Piston rod / shock shaft with thread rolled M5 ending.By this much stronger thread rolled ending, the shock shaft is virtualy unbreakable.The shock rod-end that fits to this piston rod is partno: 50320-41 and 50320-42 Piston rod fits in shock absorber: 50320 and 70300
Referentie: 80501 F3
Diff mount left, made from high grade alloy 7075.
Referentie: 80110
Chassis for the Fourtex for wheelbase according EFRA regulations. Not including shorter drive shaft. The chassis length is reduced at the front. When using the front air brake it is needed to also replace the servo mounts and use small steering servos.
Referentie: 50121 D1
Set of pins for mounting in the side guards to fix your body on the side.Includes assembly material and body clips.
Referentie: 70300-30purple
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.5mm) Internal diameter: 32mm Sold als pair.
Referentie: 18807
Conical disc for the steering system with steel ball joints
Referentie: 980070
Solid Elcon Models radio box. The lid has a groove in which the extra edge of the box fits, This secures a tight fit and makes the radio box watertight. Comes with a silicone wire to make the lid water tight and a rubber grommet for the servo cables. The needed hole for the grommet is to be drilled by the customer on his personal prefered position
Referentie: 70532 B4
Center pin for the Spline-Drive. It is recommended to replace both parts Delivered as set.
Referentie: evo-003 B4
o-rings for fixation of the alloy securement ring of the spline drive. (set)
Guidance for the spring of the spline drive, inserted in the spline drive collar.
Delivered as a set.