Referentie: 80407 F3
Support front-end, left
Support for the front-end, left side of car.
- 1:10 Scale
- 1:6 Scale
- 1:8 Scale
- BBB-P Shocks
- Downloads
- ELCON
- ELCON
- Electronics
- Materials
- Silicone Oil
- Tools
PROGRESSIVE SPRINGS 110MM GREY
Waardering
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks)
Length: 110mm (with thread diameter 2.7mm)
Internal diameter: 32mm
Sold als pair.
Omschrijving
- 2.1mm -> Green
- 2.2mm -> Orange
- 2.3mm -> Blue
- 2.4mm -> White
- 2.5mm -> Purple
- 2.6mm -> Red
- 2.7mm -> Grey
Productdetails
70300-30grey
Recensies
Geen klantenbeoordelingen op het moment.
16 andere producten in dezelfde categorie:
Referentie: 70300-04 A2
By-Pass shocker housing (front)
By-Pass shocker housing for the front shocker
Referentie: 45511 amt
Upright rear L/R
Splin-Drive upright for the rear of the TRAXX .and fourtex
Fits both left and right side.
Including bearings
Referentie: 80508
Upper wishbone mount, rear
Upper wishbone mount for the rear.
Incl assembly materials.
Referentie: 80602 F2
Shaft for the flex coupling with gear
Shaft for the flex coupling with gear pressed on.
Referentie: 18712
Bearings 10x6x3mm (10pcs)
Used for example in the planet gears.
Referentie: 80505 F4
PINION CARRIER
Pinion carrier, used on the rear and front of the Fourtex.
Referentie: 50320-41 A4
Shock rod-end (for M5)
Shock rod-end for shock shafts that have the M5 thread rolled ending.
Referentie: 70320-15 A4
Volume compensation By-Pass shocks
VAT included
Volume compensation for the By-Pass shock absorbers.
Referentie: evo-001 A4
SEAL FOR SHOCKER - ALL SHOCKS
Seal for shocker at the piston rod.Fits all Elcon shocks.
Referentie: 80403 F4
Upper wishbone
Upper wishbone with normal and left handed thread.
Made of high quality 7075 alloy.
Referentie: 80410 F2
Servo support - small servo (w.b.620mm)
Servo support for small steering servos, fits both left and right.
Fits to the chassis with weelbase 620mm
Referentie: 18924 A1
Ball joint alloy 5mm - M8 RIGHT
Spherical ball bearing glued in alloy anodized link.
The high end spherical ball bearing has a 5mm inner diameter.
The alloy link has the M8 right handed thread inside.
These ball links give a significant weight reduction compared with the steel version and has a better quality bearing than the steel version.
Referentie: 80421 F4
Drive shaft front
Drive shaft front side Fourtex.
Incl. needed steel balls and springs.
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks)
Length: 110mm (with thread diameter 2.7mm)
Internal diameter: 32mm
Sold als pair.