
Referentie: 50320-42 A2
Alloy Shock rod-end (for M5)
Alloy Shock rod-end with plastic bushing for shock shafts that have the M5 thread rolled ending
Seal for shocker at the piston rod.
Fits all Elcon shocks.
Geen klantenbeoordelingen op het moment.
Referentie: 50320-42 A2
Alloy Shock rod-end with plastic bushing for shock shafts that have the M5 thread rolled ending
Referentie: 80505 F4
Pinion carrier, used on the rear and front of the Fourtex.
Referentie: 45415-21 C3
Servo saver part with 1 arm
Referentie: 70300-30red
Progressive coloured springs for the by-pass shocks, (fits also Losi shocks) Length: 110mm (with thread diameter 2.6mm) Internal diameter: 32mm Sold als pair.
Referentie: 70320-04
By-Pass shocker housing of the rear shocker
Referentie: 70512-03
Insert with the amount of toe-in engraved. Can be mounted left and right. The upright slots into the insert for a rock solid mounting. Make your choice below. Available options 1,2,3,4 and 5 degrees. (Default option is 3 degrees)
Referentie: 70413-02 C1
Disc for the pivot of the C-hub, which is mounted on top and under the C-hub for a smooth steering of the front upright
Referentie: 80602 F2
Shaft for the flex coupling with gear pressed on.
Referentie: 70521 B4
Drive shaft for the Spline-Drive. Delivered as set.
Referentie: 80600
Mount for the flex coupling, assembled to the flywheel.
Referentie: 50320-40-r
Piston rod / shock shaft with thread rolled M5 ending.By this much stronger thread rolled ending, the shock shaft is virtualy unbreakable.The shock rod-end that fits to this piston rod is partno: 50320-41 and 50320-42 Piston rod fits in shock absorber: 50320 and 70300
Referentie: 70320-041
By-Pass shocker housing of the rear shocker
Referentie: 70300-30bleu
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.3mm) Internal diameter: 32mm Sold als pair.
Referentie: 80603 F1A
Housing for the starter, made from high grade 7075 alloy.
Referentie: 45120
Side guard for the TRAXX. Fits both Left and Right.
Seal for shocker at the piston rod.
Fits all Elcon shocks.