
Referentie: 80508
Upper wishbone mount, rear
Upper wishbone mount for the rear. Incl assembly materials.
Rear wishbone for the TRAXX & FourteX.
Fits both left/right side of the car.
Made from robust 7075 alloy.
Incl. bushings and adjustment bolt
45506
Geen klantenbeoordelingen op het moment.
Referentie: 80508
Upper wishbone mount for the rear. Incl assembly materials.
Referentie: 80507 F3
Support for the rear left of the FourteX.
Referentie: 18924 C1
Spherical ball bearing glued in alloy anodized link. The high end spherical ball bearing has a 5mm inner diameter. The alloy link has the M8 right handed thread inside. These ball links give a significant weight reduction compared with the steel version and has a better quality bearing than the steel version.
Referentie: 8x22x7 A1
Lagers voor spline drive buitenzijde set van 2 stuks
Referentie: 70528 B4
Ring for the spline drive to secure the pin. Made from alloy, anodized and laser engraved with Elcon logo.
Referentie: 45511-3 E2
Rear Hub Team Edition Euros 2022 -7mm less hieght than standard Gunn edition and TraxX 2.0 hubs fits Left or Right More adjustment and better roll centre for the Larger Wheels Made from robust 7075 alloy. Incl:Bearings / Shims / Bolts
Referentie: 18923 C1
Spherical ball bearing glued in alloy anodized link. The high end spherical ball bearing has a 5mm inner diameter. The alloy link has the M8 LEFT handed thread inside. These ball links give a significant weight reduction compared with the steel version and has a better quality bearing than the steel version.
Referentie: 70625 F4
Drive cup for the rear pinion gear carrier, with star shape for double brake discs.
Referentie: 70524 B4
Spring set for the spline drive. Assures correct positioning of the drive shafts and dif shafts.
Referentie: 45503 D4
Rear shock tower made from high grade alloy 7075. Including needed assembly materials
Referentie: 80400-21
Pinion for the crownwheel, fits both front and rear.
Referentie: 80502 F3
Diff mount right, made from high quality 7075 alloy.
Referentie: 70509 D3
Pin set (stainless steel) for mounting the upright / c-hub on the front- and the rear wishbone. The pin is mounted with 2 nyloc nuts and rings.
Referentie: 70521 B4
Drive shaft for the Spline-Drive. Delivered as set.
Referentie: 18500-22
Set of sintered bronze friction plates for the dif. Comes with rings, shims and pressure springs
Rear wishbone for the TRAXX & FourteX.
Fits both left/right side of the car.
Made from robust 7075 alloy.
Incl. bushings and adjustment bolt