
Referentie: evo-003 B4
O-ring spline (2 pcs)
o-rings for fixation of the alloy securement ring of the spline drive. (set)
Support of the clutchbell of the TRAXX.
Includes bearing, shims and needed assembly materials.
45608
Geen klantenbeoordelingen op het moment.
Referentie: evo-003 B4
o-rings for fixation of the alloy securement ring of the spline drive. (set)
Referentie: 51105 B1
Steel down stop plates for the chassis
Referentie: 70320-40 A4
Piston rod / shock shaft with thread rolled M5 ending.By this much stronger thread rolled ending, the shock shaft is virtualy unbreakable
Referentie: 70413-02 C1
Disc for the pivot of the C-hub, which is mounted on top and under the C-hub for a smooth steering of the front upright
Referentie: 70509 D3
Pin set (stainless steel) for mounting the upright / c-hub on the front- and the rear wishbone. The pin is mounted with 2 nyloc nuts and rings.
Referentie: 45110
Body for the TRAXX. Delivered as clear shell. No decals, paint or masking tape included.
Referentie: 45620-02
6 pcs of clutch shoes for the 6-shoe teflon clutches
Referentie: 18660-z316T
Pinion gear Z3 for the layshaft. Surface of the gears can be silver or black.16T
Referentie: 18660-Z314t
Pinion gear Z3 for the layshaft. Surface of the gears can be silver or black. Please select desired amount teeth. Click on the item for further information
Referentie: 70300-30bleu
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.3mm) Internal diameter: 32mm Sold als pair.
Referentie: 18701 A2
Bolt for mounting the shock absorber onto the aloy lower wishbones.
Referentie: 45409 C2
Closure plate of the topdeck for the TRAXX. Delivered including assembly materials.
Referentie: 18660-z315T
Pinion gear Z3 for the layshaft. Surface of the gears can be silver or black.15T
Support of the clutchbell of the TRAXX.
Includes bearing, shims and needed assembly materials.