Referentie: 70532 B4
CENTER PINS SPLINE-DRIVE (SET)
Center pin for the Spline-Drive.
It is recommended to replace both parts
Delivered as set.
Op voorraad
- Er zijn geen items meer in uw wagen
- Verzending
- Totaal € 0,00
Clutch bell carrier
Waardering
Carrier for the clutch bell.
Delivered including bearing, shims and assembly materials.
Omschrijving
45603
Productdetails
45603 D1
2 Items
Recensies
Geen klantenbeoordelingen op het moment.
16 andere producten in dezelfde categorie:
Op voorraad
Referentie: 70300-30bleu
PROGRESSIVE SPRINGS 110MM BLEU
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks)
Length: 110mm (with thread diameter 2.3mm)
Internal diameter: 32mm
Sold als pair.
Op voorraad
Op voorraad
Referentie: 45503-5 E2
ALLOY INSERTS TRAXX 2.0 / GUNN EDITION L 3
TRAXX 2.0 & Gunn Edition FourteX.
L 3 alloy insert
Made from robust 7075 alloy.
Incl:plastic bushing
Op voorraad
Referentie: 70201 E2
Battery strip epoxy
Battery strip from epoxy for the IMP4CT, TraxX and FourteX.
Op voorraad
Referentie: 45500-03
Dif half (gear side)
Differential half, gear side.
Contains only the bronze bushing pressed in the difhalf for the outgoing difcup.
(Not included: difcup, bearings, oil seal etc)
Op voorraad
Op voorraad
Referentie: 70512-03
TOE-IN INSERT 3 GRADEN
Insert with the amount of toe-in engraved.
Can be mounted left and right.
The upright slots into the insert for a rock solid mounting.
Op voorraad
Referentie: 45751
Exhaust TRAXX complete - lay down engine
High power exhaust for the horizontal / lay down engine.
Complete including manifold.
Op voorraad
Referentie: 51105 B1
Down stop plates from steel (4pc.)
Steel down stop plates for the chassis
Op voorraad
Referentie: 45503 D4
Shock tower rear
Rear shock tower made from high grade alloy 7075.
Including needed assembly materials
Op voorraad
Op voorraad
Op voorraad
Referentie: 45140 D4
Engine brace
Engine brace made from 7075 alloy.
Prevents cracking of the fan cover and carter.
Bolts straight onto Zenoah engines 23cc/26cc/29cc.
Op voorraad
Referentie: 70512-1 D3
3 DEGREE TOE INSERT TRAXX 2.0 / GUNN EDITION
TRAXX 2.0 & Gunn Edition FourteX.
Can be mounted left and right adjustment in wheel base possible
The upright slots into the insert for a rock solid mounting
Made from robust 7075 alloy.
Incl:plastic bushing / screws
Op voorraad
Carrier for the clutch bell.
Delivered including bearing, shims and assembly materials.