
Referentie: 70413-01 C1
Distance bush / pivot C-hub
Distance bush or pivot, which is mounted in the plastic bushings for a smooth steering of the front upright
Chassis for the TRAXX.
45100
Geen klantenbeoordelingen op het moment.
Referentie: 70413-01 C1
Distance bush or pivot, which is mounted in the plastic bushings for a smooth steering of the front upright
Referentie: 70530 B4
Wheel shaft for the Spline-Drive. Delivered as set.
Referentie: 50320-41 A4
Shock rod-end for shock shafts that have the M5 thread rolled ending.
Referentie: 70509 D3
Pin set (stainless steel) for mounting the upright / c-hub on the front- and the rear wishbone. The pin is mounted with 2 nyloc nuts and rings.
Referentie: 70521 B4
Drive shaft for the Spline-Drive. Delivered as set.
Referentie: 18660-Z314t
Pinion gear Z3 for the layshaft. Surface of the gears can be silver or black. Please select desired amount teeth. Click on the item for further information
Referentie: 45503-5 E2
TRAXX 2.0 & Gunn Edition FourteX. L 3 alloy insert Made from robust 7075 alloy. Incl:plastic bushing
Referentie: 18807
Conical disc for the steering system with steel ball joints
Referentie: 18660-z118T
Z1 gear (pinion), mounted on the clutch bell. 18 T
Referentie: 70300-30purple
Progressive coloured springs for the by-pass shocks, (fits also Losi and bbb-p shocks) Length: 110mm (with thread diameter 2.5mm) Internal diameter: 32mm Sold als pair.
Referentie: 45503 D4
Rear shock tower made from high grade alloy 7075. Including needed assembly materials
Referentie: 45561 D1
Outer part of the central brake housing. Delivered including assembly materials.
Referentie: 18500-22
Set of sintered bronze friction plates for the dif. Comes with rings, shims and pressure springs
Referentie: evo-0016
High grade oil for the differential.50 ml in a flacon. We advice to fill the differential with approximately 10~12ml of oil.So this is sufficient to re-fill your differential twice.
Chassis for the TRAXX.