
Referentie: 18660-Z120T
HELICAL GEAR Z1 20T
Z1 gear (pinion), mounted on the clutch bell. 20T
Pinion gear Z3 for the layshaft.
Surface of the gears can be silver or black.15T
Geen klantenbeoordelingen op het moment.
Referentie: 18660-Z120T
Z1 gear (pinion), mounted on the clutch bell. 20T
Referentie: 70320-04
By-Pass shocker housing of the rear shocker
Referentie: 980070
Solid Elcon Models radio box. The lid has a groove in which the extra edge of the box fits, This secures a tight fit and makes the radio box watertight. Comes with a silicone wire to make the lid water tight and a rubber grommet for the servo cables. The needed hole for the grommet is to be drilled by the customer on his personal prefered position
Referentie: 70541
Complete set of spline drives shafts . 2CC of grease for the spline and 2CC of oil for lubrication of the CVD is delivered in the package. Wheel squares are not included.
Referentie: 70320-40 A4
Piston rod / shock shaft with thread rolled M5 ending.By this much stronger thread rolled ending, the shock shaft is virtualy unbreakable
Referentie: 18620-03A
Distance barrel for the clutch.(since 1-1-2015)Sold per piece.Fits the 45620, 80620, 18620 and the 50620 clutch. (clutches after 1-1-2015)
Referentie: 45608 D1
Support of the clutchbell of the TRAXX. Includes bearing, shims and needed assembly materials.
Referentie: 45415-06 C3
Steering rod made from stainless steel. (L=105mm)
Referentie: 70413-01 C1
Distance bush or pivot, which is mounted in the plastic bushings for a smooth steering of the front upright
Referentie: 45130 D1
Needed as shim rings when engine is in layed down configuration.
Referentie: 45409 C2
Closure plate of the topdeck for the TRAXX. Delivered including assembly materials.
Referentie: 45503-5 E2
TRAXX 2.0 & Gunn Edition FourteX. R 3 alloy insert Made from robust 7075 alloy. Incl:plastic bushing
Referentie: 45550-08 D1
Set of brake pads for the TRAXX. The set consists of a 2mm thick and 3mm thick brake pad. Mount the thickest brake pad at the brake axle (inside).
Referentie: 45520 B1
Adjustable shockertower extension. Makes your shocktower wider allowing a more vertical position of your rear shocks. This add lateral grip especialy on sand and cley tracks. Beside a wider position height can be adjusted as well in 3 positions for optimal use of small/big wheels.
Pinion gear Z3 for the layshaft.
Surface of the gears can be silver or black.15T